Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width
CycleOps' Trainer Skewer ensures your trainer will hold your rear wheel in place. Made of heavy-duty stainless steel, it will provide years of reliable use and keeps your high-end skewers pristine.
Leveling block for indoor trainers
Train In Comfort Use this nifty device to keep your ride comfortable. When placed under your front wheel, this block raises the front of the bike by approximately 2.75” (70mm) to give you a more level and stable platform for your workout.
CycleOps' Climbing Riser Block offers 3 levels of elevation to lift your front wheel and provide a workout simulating climbing hills. For steeper climbing workouts, 2 climbing blocks (sold separately) may be placed on top of each other for many different adjustment levels.
CycleOps' Magnetic Remote Shifter is for use with CycleOps' standard Mag trainers. It allows you to adjust the resistance without leaving the saddle and fits on your stem or handlebars.
Kinetic's Riser Ring lets you level your bike when you're riding on your trainer. Plus, there are 3 other steps that let you simulate climbing by elevating the front wheel. The Riser Ring is simple to use and stable for excellent support. • Designed for the following Kinetic trainers: the Road Machine, Magnetic, and Cyclone
No Sweat, No Scratches. When you train hard, you sweat. Good for your body, but not good for your floors. This mat keeps the sweat off your floors and also protects them from being scratched by your trainer, wheel block or cycling shoes. - Reduced Noisy Floor Rumble - Protects Your Floors
$64.99 - $89.99
Kurt's Small Wheel Adapter attaches to your Kurt Kinetic trainer and raises the resistance unit so you can use your trainer with small-wheeled bikes. This adapter works with bike wheels as small as 16 inches in diameter. Comes in two varieties to work with both old and new Kurt Kinetic trainers. • T-580 Small Wheel Adapter for use with all 2013 and newer trainer models. • Old trainer style uses T-500
Blackburn's axle conversion kits make your thru axle bike compatible with most trainers and many trailer hitches on the market. The adapter kit is designed to turn your 12mm x 135mm, 142mm, or 148mm thru axle bike into a trainer-ready machine or a trailer-pulling family explorer. Choosing the correct axle is simple. First, research which axle spacing your bike utilizes (135, 142, or 148mm). Next, choose the correct thread pitch by either comparing your thread spacing to Blackburn's thread scale on the packaging, or by matching to one of the brands listed below: - RockShox Maxle - 1.75mm thread pitch - Syntace X-12 - 1.0mm thread pitch - DT x-12 - 1.0mm thread pitch - Shimano E-Thru - 1.5mm thread pitch - DT E-Thru - 1.5mm thread pitch
Trainer thru axle adapter for CycleOps Trainers. Fits most 142mm thru axles with 1.0 and 1.75 thread pitch. This kit consists of an axle, washers, and end caps with bolts for use with CycleOps Classic or Pro Series trainers. The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. PowerSync Trainers are not currently 29er compatible. Partial list of compatible bike frames: - Canyon - Trek - Specialized - Cannondale - Niner - Salsa - Giant Reign - Scott - Santa Cruz - Norco
Kurt Kinetic's 12mm Traxle Through-Axle lets you attach your mountain bike to a Kinetic trainer without changing the original skewer. Three different thread pitches ensure a perfect fit for whichever axle you're using.
CycleOps' 20-/24-inch Wheel Adapter allows you to attach your BMX or recumbent bike to your trainer (sold separately). The adapter raises the resistance unit up for smaller wheels. It's compatible with CycleOps' Wind, Mag, Mag+, Magneto, and Fluid² trainers.
When you need to transport your trainer, CycleOps' Trainer Bag is the most convenient solution. There is no need to worry about your trainer getting damaged when it's safe and secure on the way to your race or event.
- Adapts a thru axel hub bike for a trainer. - Only compatible with current classic series trainers. - Fits most 142-148 Thru axle bikes with 1.0 or 1.75 thread pitch - Kit consists of an axle, washers, end caps with bolts and a shorter version of our bolt action slider for the classic series trainer. - The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems.
Get the natural feel of riding outside when you use Kurt Kinetic's Turntable Riser Ring in conjunction with Kurt Kinetic's Rock and Roll trainer (sold separately). The Turntable Riser Ring elevates your front wheel so you get a more natural riding position, and thanks to the swiveling base, you can use your most natural pedal stroke.
Use CycleOps' Training Mat to protect your floors and carpets from bike grime, sweat, and trainer wear. Durable and water proof, the Training Mat helps keep your trainer from moving across the floor and it absorbs vibration and noise.
Train Free, Train Perfect with the Wahoo Tickr X. This ultimate workout wearable is the latest addition to the Tickr family, and it tracks workouts with and without your phone. The Tickr X's memory feature captures heart rate and calorie burn even if your phone isn't connected - perfect for those days where you forget your phone or want to leave it in your gym bag. It also tracks additional motion analytics such as cycling cadence. It's the perfect fitness tracker for all types of athletes!
With CycleOps' Rollers Fork Stand anyone can ride rollers! Just attach this little beauty to your rollers, clamp your fork in place, get on and ride. It's that simple. The Fork Stand mounts directly to the frame of your rollers for excellent strength and stability. No balancing is necessary, so you can watch television or read while riding your rollers!
Protect your fine Kurt Kinetic trainer and make it easy to transport with their Trainer Bag. This sturdy nylon bag is large enough to hold your Kurt trainer and Riser Ring, and it's easy to carry thanks to the strong handle and removable shoulder strap. The Trainer Bag zips closed and has a handy zip front pocket, too. Kurt Trainers and Riser Rings are sold separately.
If you're really serious about your trainer sessions, check out Kurt Kinetic's Pro Flywheel. It attaches quickly and easily to your Road Machine or Rock and Roll flywheel (sold separately) for a total of 18 pounds. It takes your Kurt Kinetic trainer's already stellar real-road feel and ups the realism, which is a must for hard-core endurance workouts, like tempo and long distance rides. You'll also experience longer wind-ups when doing sprint intervals and a longer coast-downs.
In the Tech Mag 1, Blackburn delivers a high quality trainer that lives up to the production and quality standards of the brand, yet is simple, easy to use and affordable. - Single resistance setting for no-fuss operation - Compact, lightweight and foldable design - Rubber feet micro-adjust for extra stability - Includes steel quick release wheel skewer so that your original equipment does not get scratched - No assembly required - Bike installation is simple and works with many wheels sizes from 26 x 1" to 29 x 2.3" - 6713g / 14.80lb Dimensions: -Length 550/550mm/21.7/21.7in -Width 550/480mm/21.7/18.9 -Height 415/160mm/16.3/6.3in
The Blue Twist is streamlined and simple, featuring the performance Tacx's Blue trainers are known for, but without a handlebar resistance lever. You manually set the resistance, selecting one of the seven positions using a switch on the brake. The maximum resistance is 700 Watt. The Blue Twist is suitable as an entrance model. Software: PC/laptop - Operation: Switch on brake Resistance: unit Magnetic Braking positions: 7 Descent simulation - Max brake power: (10 sec.) 700 Watt Sprint power: (1 min.) 600 Watt Mass inertia: 8 kg 1 Suitable for all bikes, if necessary with axle skewers or nuts Wheel diameter: 26"- 29" and 700c; 29" with trainer tyre
With Blackburn's Mag 5 Trainer, you can mix up your workout with five resistance settings that you select on the fly with a handlebar-mounted remote. - Five position handlebar remote that is simple to attach and easy to use - Fastcrank mounting system allows for simple and quick installation - Compact, lightweight, and foldable design - Rubber feet micro-adjust for extra stability - Includes steel quick release wheel skewer so that your original equipment does not get scratched - No assembly required - Bike installation is simple and works with many wheels sizes from 26 x 1" to 29 x 2.3" - Five resistance settings across a broad range of levels Dimensions: - Length 550/550mm/21.7in - Width 550/480mm/21.7/18.9in - Height 415/160mm/16.3/6.3in - Weight 8210 g / 18.10 lb
The Blue Matic is the intermediate model of Tacx's Blue cycletrainers. Its maximum resistance is 700 Watt. The Blue Matic has a magnetic brake with permanent-magnets. You set the resistance selecting one of the ten different positions via the handlebar resistance lever. During your training session the resistance increases as you cycle faster or switch to a heavier setting. The robust frame stands firmly on the ground and it is very user friendly because the trainer can be assembled in no time at all. Software: PC/laptop - Operation: Handlebar resistance lever Resistance: unit Magnetic Braking positions: 10 Descent simulation - Max brake power: (10 sec.) 700 Watt Sprint power: (1 min.) 600 Watt Mass inertia: 8 kg 1 Suitable for all bikes, if necessary with axle skewers or nuts Wheeldiameter: 26"- 29" and 700c; 29" with trainer tyre
- Quiet magnetic unit with 7 resistance levels activated by handlebar mounted thumb shifter - Handlebar mounted, 7-level thumb shifter, quickly mounts on handlebars from 22.2mm (7/8") up to 31.8mm (1 1/4") - Precision–turned 2" aluminum roller and 1500g (3.3lbs) flywheel - Heavy-duty, 100% steel, TIG welded frame with wide stance and tough powder coating that looks great and resists rust - Non–skid rubber adjustable leveling feet - Tough steel replacement quick-release skewer included - Accommodates most 24", 26", 700C, and 27" wheel/tire sizes
Do you want to work on your rhythm, make your muscles more flexible or refine your coordination and technique? Then use the Antares rollers. You can cycle freely, just like on the road or track. If you find it difficult to cycle unsecured you can use the Antares bracket. The Antares is collapsible and is easy to transport. Some cyclists keep finding it hard to ride without a restraint. They choose the Tacx Antares and use the support for Antares to secure the bike, without the front wheel, and still cover the mileage in front of them. Riding on ‘the Tacx’ is a relatively easy way to up your track pace and make your muscles more supple. This makes for completely natural movements. You keep pedalling from the hips, just as you would on the road or track. A high pedalling frequency, that is needed for the right feeling in the legs, is also possible. The Tacx Antares is the official warming-up trainer at the 2012 Olympic Games.
The Blue Matic has been a Tacx offering for many years and is a very popular trainer. During your training session you can use the handlebar resistance lever to adjust the resistance as needed. The Tacx Blue Matic Smart is bundled with an ANT+/BT speed & cadence sensor to allow connection with tablets or smartphones, and allows use of interactive software and applications. Train with the Tacx Training app, Tacx Cycling app, Zwift, or TrainerRoad! - Stable and robust footprint - The bike is fixed in the trainer easily by two simple clicks - Handlebar resistance lever with 10 positions - Brake system with 2 X 8 permanent magnets - 2.5lbs flywheel - Maximum resistance 700 watt - Easy to assemble brake system FEATURES - Type of trainer: Basic trainer with magnetic brake - Magnets: 2x8 Permanent ferrite magnets - Transmission: Roller, 30 mm - Electrical requirements: No mains voltage required - Power indicator: None - Connection indicator (ANT/BT): None - Firmware upgradable: No - Suitable bikes: Race, Tri & MTB, if necessary with axle skewer, 29? wheel with Tacx trainer tire - Supplied with: Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS - Max. power (40 km/h): 700 Watt - Max. slope: n.a. - Simulation of descent: No - Max. torque: 12.2Nm - Max. brake force: 36N - Flywheel: Actual of 1.25kg - Mass inertia: 8 kg (17.6 lbs) - Calibration: n.a. - Footprint (lxw): 640×635mm (25.2×25.0in) - Height: 440mm (17.3in) - Dimensions when folded: 610×420×250mm (24.0×16.5×9.84in) - Weight: 8.40kg (18.5lbs) - Article number: T2650.VP DATA OUTPUT AND CONTROL - Wireless communication: None - Control by: Handlebar resistance lever with 10 positions - Output: n.a. - Read out on: n.a. - Accuracy: n.a.
CycleOps' Magneto is an innovative training tool to keep you fit, trim, and ready to ride no matter what the weather is like outside. It offers progressive resistance, which means the faster you go, the quicker the resistance ramps up, just like the real world. There is no adjustment necessary, and the resistance level automatically changes to give you a smooth, quiet ride. Plus, the frame is tough, sturdy and stable so you can ride as hard as you want.
The Kinetic Magnetic trainer is the perfect choice for bicycles with lower gearing, like cyclocross bikes, fixies, singlespeeds, mountain bikes and even BMX bikes. Its super-smooth magnetic resistance unit features a heavy 6.25-pound flywheel simulating outdoor riding, so that you experience the same feeling and workout you get outside. And, with its handlebar-mounted thumb lever, you can choose from nine levels of resistance for everything from easy spins to hard efforts to full-on intervals and sprints. Other great features include the super-stable oversize steel frame that folds for easy portability and storage; a secure, easy-to-use quick-release bike mount so you can go from trainer to outdoors in a blink; a 2 1/8-inch-wide roller that minimizes tire wear; and the ability to use bikes with both quick-release and bolt-on rear wheels.
Page 1 of 2 Next page