Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.
Lezyne's LED Handle Bar Mount Adapter is a composite matrix adapter to replace the rubber strap that ships on 2016 and later models of Macro XL, Power XL, Super XXL, and Deca XXL lights, so that they can be used with the Aluminum Handlebar Mount, the Composite Handlebar Mount, Aluminum Helmet Mount, or Composite Handlebar Mount.
Updated and more secure clothing clip for mounting CatEye safety lights.
Optional mounting bracket for the CatEye Rapid X, CatEye Rapid X2, and CatEye Rapid X3. Allows you to mount your Rapid to any of the CatEye tail light brackets.
Replacement silicone rubber mounting strap, for use with the Hecto, Micro, and Macro LED lights.
A handlebar mount for Micro (front), Macro, and Hecto (front) LED lights. This mount is made of a snap-fit mold injected Composite Matrix cradle and is secured to a wide range of handlebar diameters with a multi-position, silicone rubber strap for tool-less installation.
Replacement mounting strap for the Zecto and Femto LED lights.
Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.
CatEye's Center Fork Bracket helps clear your handlebars by positioning your favorite CatEye headlight (sold separately) in front of your bike's head tube.
Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.
Replacement Part – Multi Sport Headlight & Tail Light Bracket - Works for both headlights & tail lights - Great for helmet application - 3 strap sizes allows fitting from 20mm to over 100mm - Adjusts to fit aero & round seat posts & handlebars - For lights up to 120 grams in weight - Cannot be used with: TST-70, TST-100, TST-150, TBT-50R, TBT-120F, USL-200, USL-250, USL-450, USL-500
Apollo is a waterproof super bright LED light that is small and easy to mount. It comes in Headlight, Tail Light, USB Headlight, USB Tail Light and Combo pack. - Super Bright LED - 50 hrs runtime on steady - 150 hrs runtime on flash - Aluminum Body - Extremely adjustable release strap - Waterproof - 240 degree visibility
FEATURES - USB Rechargeable - Strap Fits Bars 20-40mm - Waterproof - Micro USB Cable Included - 240° Visibility SPECS - Modes: High: 3 hrs, Medium: 6 hrs, Slow Flash: 50 hrs, & Quick Flash: 40 hrs - Weight: 29 Grams with Bracket - Runtime: Up to 50 hrs on Flash - Battery: Lithium Polymer
Sigma Rear Brake light. A simple little light with a big purpose — safety. Just clip this light on your rear brake cable and it will help alert anyone behind you that you are slowing down. Perfect for kids, commuters, and group rides! Fits U-brakes, V-brakes, canti's, road calipers, mechanical disc brakes, but won't fit hydraulics. Functions: - LED brake light with replaceable CR 1025 button cell battery (included) - Clearly visible, red brake LED during use - Burn time: approx. 200 hours continuous light, average of approx. 100,000 braking processes - Attaches to the rear brake cable using a 2.5 mm hex wrench (not included) - Quick and simple attachment - Attaches to cable actuated mechanical brakes (25 mm clearance) - Rounded brass screw to protect the brake cable - Five different colors are available to match any bike. - Robust, water-resistant housing - Weight: 7 g
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.
Serfas' Stop Sign Red Taillight boasts 5 ultra-bright LEDs with a built-in reflector for excellent visibility. It has flashing, steady, and random and rolling modes, and runs for up to 120 hours on the 2 included AA batteries.
Optional Accessory Saddle Rail Mount Bracket for most CatEye taillights.
- 1 Super bright LED per light - Easy On/Off - Just push the lens - Weather-tough water-resistant design - Universal rubber bracket - Battery type: CR2032
Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.
- 2 Super bright LED's per light - Easy On/Off - Just push the lens - Weather-tough water resistant design - Universal rubber bracket
The versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne KTV Pro, Power XL, Macro XL, Hecto XL and Micro XL Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.
Topeak's RedLite II mounts on seatposts, seat bags and seatstays. Its 4 super-bright LEDs shine through a 220-degree, wide-angle, reflective lens to alert traffic approaching from almost anywhere. The RedLite's watch-style lithium batteries (included) offer up to 100 hours of run time. Plus, you can choose from constant or blinking mode.
When you find yourself out in the dark, Endura's Luminite LED Snap Pack is an quick way to enhance your visibility to others. It offers 3 phases of flash frequency and can operate for up to 50 hours on a single coin cell battery. Endura includes both a seat post clip and a clothing S-Clip, so you can position this versatile light wherever is easiest.
- Blackburn's most affordable Local rear light is powered by a single super bright LED. - Built to ANSI FL-1 light standard - 10 lumens - 2 modes: High: 10 lumens, Steady Flash: 10 lumens - Runtime: High: 70 hrs, Steady Flash: 140 hrs - Silicone mount, 1 size fits all - Large red lens power button is easy to turn on/off while pedaling or wearing gloves - Replaceable AA batteries (Included)
Lezyne's Femto Drive Front is a compact, bright, and beautifully made light. The lens is made of high-grade optical material and serves as an activation button that cycles through four flash and one solid mode. The CNC machined aluminum body makes the Femto Drive durable and weather resistant while the back plate can be unscrewed to replace the two CR2032 batteries. The multi-position silicone rubber strap attaches the light to a wide range of handlebar diameters.
Blackburn's minimalist Click front light is incredibly visible to drivers, yet nearly invisible on your bike. A simple 'click' of the lens will power up 2 LEDs that pump out 18 lumens of beautiful, bright light that is even visible from the side of your bike for cross traffic. The silicone mounting strap makes it easy to install/remove and works on pretty much any handlebar or bike frame. Two CR2032 coin cell batteries are included and are super-easy to replace. - 20 lumen front light - Versatile silicone mounting system - Waterproof to IP-65 standard
Blackburn's minimalist Click rear light is incredibly visible to drivers, yet nearly invisible on your bike. A simple 'click' of the lens will power up 2 LEDs that pump out 4 lumens of beautiful, bright light that is even visible from the side of your bike for cross traffic. The silicone mounting strap makes it easy to install/remove and works on pretty much any handlebar or bike frame. Two CR2032 coin cell batteries are included and are super-easy to replace. - 4 lumen rear - Versatile silicone mounting system - Waterproof to IP-65 standard
Spare mount for Blackburn's Countdown 1600 front light
Lezyne's Femto Drive Rear is a compact, bright, and beautifully made light. The lens is made of high-grade optical material and serves as an activation button that cycles through four flash and one solid mode. The CNC machined aluminum body makes the Femto Drive durable and weather resistant while the back plate can be unscrewed to replace the two CR2032 batteries. The multi-position silicone rubber strap secures the light to a wide range of seatpost and seatstay diameters.
The WhiteLite's 3 powerful LEDs are just what you need to get home safely after the sun goes down. With its steady and blinking modes you're sure to catch the attention of drivers and its included mini batteries are good for up to 100 hours of use! Plus, the WhiteLite II features a super-simple no-tools handlebar mount that works on any bike!
Page 1 of 7 Next page