Wheels

Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. At the center of the 303 Firecrest Tubeless is a versatile and durable new hubset, the German-engineered ZR1 DB. This hubset features 66 points of engagement for quicker response. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)

Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)

Zipp's 303 Firecrest Tubular Disc-brake wheels offer game-changing innovations for performance-minded cyclists. These wheels were developed to meet the needs of our sponsored professional road and cyclocross racers as well as any cyclist who prefer the time-proven ride qualities of tubulars. The 303 Firecrest Tubular features our ABLC Sawtooth dimple design which extends all the way to the edge of the rim. The rim features construction upgrades that deliver improved impact resistance. These innovations enhance a wheelset that's excelled in two of pro cycling's harshest proving grounds, the Spring Classics and the Cyclocross World Cup. At the center of the 303 Firecrest Tubular is a versatile and durable new hubset, the German-engineered ZR1 DB. - Go-anywhere 45mm rim depth tubular pro proven in Spring Classics and Cyclocross World Cup - New ZR1 DB hubset is engineered in Germany with better seal design for improved durability - Center Lock rotor interface (lockring included) - New Zipp graphics and cosmetic identity that scream speed - Ships with 12mm end caps

Zipp's 303 Firecrest Tubular Disc-brake wheels offer game-changing innovations for performance-minded cyclists. These wheels were developed to meet the needs of our sponsored professional road and cyclocross racers as well as any cyclist who prefer the time-proven ride qualities of tubulars. The 303 Firecrest Tubular features our ABLC Sawtooth dimple design which extends all the way to the edge of the rim. The rim features construction upgrades that deliver improved impact resistance. These innovations enhance a wheelset that's excelled in two of pro cycling's harshest proving grounds, the Spring Classics and the Cyclocross World Cup. At the center of the 303 Firecrest Tubular is a versatile and durable new hubset, the German-engineered ZR1 DB. - Go-anywhere 45mm rim depth tubular pro proven in Spring Classics and Cyclocross World Cup - New ZR1 DB hubset is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Center Lock rotor interface (lockring included) - New Zipp graphics and cosmetic identity that scream speed - Ships with 12mm end caps

The 45mm deep 303 NSW is built for a singular purpose: to be fast, everywhere. But the 303 NSW is no "race day only" wheelset to be tucked away in a wheel bag until a race number is pinned to the rider's jersey. It's built to take the abuse of everyday training rides, Gran Fondos, and wandering adventures. Zipp has achieved this reliability at a lighter weight with a revised carbon fiber layup developed through testing on the famed cobbles of the Arenberg Forest with the world's fastest riders. The 303 NSW Tubeless features a 19mm internal rim width and corresponding outer rim shape for aerodynamic optimization with 25mm tires. This wheel allows you to run tubeless or traditional clinchers. The benefits of tubeless include superior flat protection, the ability to run lower pressures, and a smoother ride with high cornering grip and low rolling resistance. - Versatile 45mm rim profile for increased speed and better cornering, control, and comfort - Tubeless design provides secure performance when ridden at lower tire pressures - ShowStopper textured brake track delivers the best modulation and shortest stopping distances in wet and dry conditions - New Zipp graphics and cosmetic identity that scream speed. Applied using Zipp's ImPress direct-print technology - Ships with QR end caps and quick release skewers

Zipp's 404 Firecrest Tubeless Disc-brake wheels are a go-to speed weapon for any situation. Their aero and crosswind-stable 58mm rim depth is ideal for road races, time trial and triathlon, gran fondos, and endless training over all types of terrain. The 404 Firecrest Tubeless Disc brake is infused with technologies developed in our Indianapolis advanced development lab. Zipp's ABLC Sawtooth Technology uses a complex dimpling pattern to improve aero efficiency. At the center of the 404 Firecrest Tubeless Disc-brake is a versatile and durable new hubset, the German-engineered ZR1 DB. If you had to choose just one wheel for road riding and racing, the 404 Firecrest Tubeless Disc brake is a savvy and speedy choice. - All-around aero 58mm rim depth with proven crosswind stability - ABLC Sawtooth dimple design helps manage airflow around the rim and contributes to a faster, more stable wheel - Tubeless ensuring secure performance even when ridden at lower tire pressures - ZR1 DB hub is engineered in Germany with better seal design for improved durability - Superior modulation and stopping power of disc brakes - New Zipp graphics and cosmetic identity that scream speed - Center Lock rotor interface (lockring included) - Ships with 12mm end caps

Zipp's legendary speed weapon, the 404 Firecrest, is better than ever. This go-to rim-brake wheelset is, for the first time, tubeless-ready. That means you can run reduced tire pressure for reduced rolling resistance and increased cornering grip and compliance without the risk of pinch flats. This wheel's 58mm rim depth is a classic that has carried athletes to victory in every kind of event and situation—every triathlon distance, breakaways, field sprints, and hilly finishes. Zipp's ABLC Sawtooth Technology uses a complex dimpling pattern to improve aero efficiency, while Zipp's ShowStopper textured braking surface delivers unrivaled rim braking performance in wet or dry conditions. At the center of the 404 Firecrest Tubeless rim-brake is a versatile and durable new hubset, the German-engineered ZR1. If you had to choose just one wheel for road riding and racing, the 404 Firecrest Tubeless is a savvy and speedy choice. - All-around aero 58mm rim depth with proven crosswind stability - ABLC Sawtooth dimple design helps manage airflow around the rim and contributes to a faster, more stable wheel - New ZR1 hub is engineered in Germany with better seal design for improved durability - Tubeless ensuring secure performance even when ridden at lower tire pressures - ShowStopper textured brake track delivers superior modulation and shortest stopping distances in wet and dry conditions - New Zipp graphics and cosmetic identity that scream speed - Ships with QR end caps and quick release skewers

Zipp's ultimate all-around speed weapon is now tubeless-ready. That means you get all of the aero advantages of the 454 NSW Tubeless Disc-brake wheelset with the added benefit of increased cornering grip and compliance with reduced rolling resistance. The wheel's 19mm internal width is optimized for running wider tubeless tires at reduced air pressure. The 454 NSW's undulating 53/58mm-deep rim shape—our proprietary Sawtooth profile—takes design cues from nature for our highest performing wheel when it comes to aero efficiency and crosswind stability. A humpback whale's fast and graceful movements are aided by tubercles on its pectoral fins. These structures inspired Zipp advanced development engineers to, for the first time, systematically apply biomimicry to solve the complex challenge of designing a wheel, with the undulating Hyperfoil nodes, that reduce both aerodynamic drag and side force. Combined that with tubeless compatibility and the power of disc brakes, and you are set for the ultimate in Zipp performance. - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stability performance with an undulating 53/58mm rim depth - 19mm internal width and tubeless compatibility for optimization of wider tires with lower tire pressure - Cognition DB hubset rolls efficiently whether you are pedaling or coasting - New Zipp graphics and cosmetic identity that screams speed, applied using Zipp's ImPress direct-print technology - Center Lock rotor interface (lockring included) - Ships with 12mm end caps

Zipp's ultimate all-around speed weapon is now tubeless-ready. That means you get all of the aero advantages of the 454 NSW Tubeless Disc-brake wheelset with the added benefit of increased cornering grip and compliance with reduced rolling resistance. The wheel's 19mm internal width is optimized for running wider tubeless tires at reduced air pressure. The 454 NSW's undulating 53/58mm-deep rim shape—our proprietary Sawtooth profile—takes design cues from nature for our highest performing wheel when it comes to aero efficiency and crosswind stability. A humpback whale's fast and graceful movements are aided by tubercles on its pectoral fins. These structures inspired Zipp advanced development engineers to, for the first time, systematically apply biomimicry to solve the complex challenge of designing a wheel, with the undulating Hyperfoil nodes, that reduce both aerodynamic drag and side force. Combined that with tubeless compatibility and the power of disc brakes, and you are set for the ultimate in Zipp performance. - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stability performance with an undulating 53/58mm rim depth - 19mm internal width and tubeless compatibility for optimization of wider tires with lower tire pressure - Cognition DB hubset rolls efficiently whether you are pedaling or coasting. Its Axial Clutch technology allows the freehub's ratcheting mechanism to deliver half the mechanical drag of conventional three-pawl hubs. - New Zipp graphics and cosmetic identity that screams speed, applied using Zipp's ImPress direct-print technology - Center Lock rotor interface (lockring included) - Ships with 12mm end caps

Zipp's ultimate aero weapon is now tubeless-ready. That means you get the many aero advantages of the 858 NSW Tubeless rim-brake wheels with the added benefit of increased cornering grip and compliance with reduced rolling resistance. The wheel's 19mm internal width is optimized for running wider tires at reduced air pressure. The 858 NSW's undulating 77/82mm-deep rim shape, our proprietary Sawtooth profile, takes design cues from nature for our highest performing wheel when it comes to aero efficiency and crosswind stability. And, it's nature that inspired Zipp advanced development engineers to, for the first time, systematically apply biomimicry to solve the complex challenge of designing a wheel. The result is the undulating Hyperfoil nodes that reduce both aerodynamic drag and side force. Simply put, the 858 NSW Tubeless is ideal for those focused on triathlon, time trials, or aggressive road riding. - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stability performance with an undulating 77/82mm rim depth - 19mm internal width and tubeless compatibility for optimization of wider tires with lower tire pressure - Industry-leading ShowStopper brake track: powerful and consistent braking, even in the wet - Cognition hubset rolls efficiently whether you are pedaling or coasting - New Zipp graphics and cosmetic identity that screams speed, applied using Zipp's ImPress direct-print technology. - Ships with QR end caps and quick release skewers

Zipp's ultimate aero weapon is now tubeless-ready. That means you get the many aero advantages of the 858 NSW Tubeless rim-brake wheels with the added benefit of increased cornering grip and compliance with reduced rolling resistance. The wheel's 19mm internal width is optimized for running wider tires at reduced air pressure. The 858 NSW's undulating 77/82mm-deep rim shape, our proprietary Sawtooth profile, takes design cues from nature for our highest performing wheel when it comes to aero efficiency and crosswind stability. And, it's nature that inspired Zipp advanced development engineers to, for the first time, systematically apply biomimicry to solve the complex challenge of designing a wheel. The result is the undulating Hyperfoil nodes that reduce both aerodynamic drag and side force. Simply put, the 858 NSW Tubeless is ideal for those focused on triathlon, time trials, or aggressive road riding. - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stability performance with an undulating 77/82mm rim depth - 19mm internal width and tubeless compatibility for optimization of wider tires with lower tire pressure - Industry-leading ShowStopper brake track: powerful and consistent braking, even in the wet - Cognition hubset rolls efficiently whether you are pedaling or coasting. Its Axial Clutch technology allows the freehub's ratcheting mechanism to deliver half the mechanical drag of conventional three-pawl hubs. - New Zipp graphics and cosmetic identity that screams speed, applied using Zipp's ImPress direct-print technology. - Ships with QR end caps and quick release skewers

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

Surly Rim Strips have one job and they do it well. They cover the cutouts in your rim and — if you're running a tube — they protect it from spoke heads and other sharp matter (okay, so maybe they have TWO jobs but they do them both really well.) Rim strips are crucial and should be used with all Surly rims. Ours come in an array of colors so you can really "express yourself." Surly Rim strips are available in two different materials: PVC and Nylon. PVC is great if you plan on only running tubes. However, if there's any part of you that wants to try this tubeless thing you've been hearing about, Nylon strips are just the ticket. They're thinner and offer minimal stretch so they stay put and lay nicely inside the rim to provide a secure seal. Plus, they're lighter which we all know means you'll go faster… maybe.

Pack of 30 ornaments. - 5 different colors - Fits all standard spoke diameters

Do you need to replace the right lock washer seal on your Alfine SG-S700 internally geared hub? If you're not sure, it might not be a bad idea, as contamination from damaged or worn seals is the kryptonite of virtually maintenance-free internally geared hubs.

A simple solution for completing the Zipp aerodynamic package by covering the valve access hole on most disc wheels. Black, self-adhesive oval patches with the Z logo, in a package of five.

Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.

Need a Shift Cable Fixing Bolt Unit for your Alfine S7000/S700 hub? Here it is. Now, get that bike back on the road!

Replacement Pawls for all Oozy hubs.

Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender

Keeping contamination out of your internally geared hub is critical to its function and longevity. Sometimes, the oil port bolt comes loose and it's easy to lose, even if you've just taken it out to oil your hub. Keep a spare or two so your hub stays clean inside and it'll last you many, many miles.

New cones make hubs spin like silk. Take advantage of your Shimano Alfine hub's highly serviceable design, and replace the bearing cones if they are worn or damaged. This one is specifically for the right side.

Front and rear skewer set, suitable for MTBs - Durable chromoly axles with lightweight alloy nuts - Tightens with allen key

Replacement springs and pawls. Includes 6 pawls, 6 springs and 1 plastic retaining ring that holds the pawls in place even during disassembly to ensure you're never searching the floor for tiny springs.

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - 22mm metal dust seal is pressed on cone - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Cone Diameter: 15.0mm - Dust Seal Diameter: 22mm - Length: 11.4mm - 1 cone per bag COMPATIBLE HUBS: - Shimano Nexave HB-T400 Front - Shimano Deore HB-M510 Front - STX HB-MC32/30 Front - STX Parallax Front

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.7mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Ultegra 6400 Front - Shimano 105 HB-5500 Front - Shimano 105 HB-5501 Front - 105 SC 6400 Front

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Left Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Cone Diameter: 17.0mm - Dust Seal Diameter: 25.5mm - Length: 16.0mm - 1 cone per bag COMPATIBLE HUBS: - XT M750, 9-spd Rear - XT M760, 9-spd Rear - XT M765, 9-spd Rear - Deore LX M570, 9-spd Rear

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Right Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 17.0mm - Length: 9.0mm - 1 cone per bag COMPATIBLE HUBS: - XT M750, 9-spd Rear - XT M760, 9-spd Rear - XT M765, 9-spd Rear - Deore LX M570, 9-spd Rear

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Cone Diameter: 15.0mm - Dust Seal Diameter: 22mm - Length: 12.7mm - 1 cone per bag COMPATIBLE HUBS: - Shimano Deore LX HB-M570 Front - Shimano Deore XT HB-M750 Front