Filter By:
Hubs

$31.99
Stan's 3.30HD 20mm Hub Kit makes Stan's 3.30HD front hubs 20mm through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on.

$33.54
The 3.30/3.30Ti 9mm Thru Axle Hub Kit makes Stan's 3.30 front hubs 9mm through axle compatible. Installation is easy—just pull the old ones off and put the new ones on.

$33.54
The 3.30HD 9mm Thru Hub Kit makes Stan's 3.30HD front hubs 9mm through axle compatible. Installation is easy—just pull the old ones off and put the new ones on.

$46.99
The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts.
- Double contact sealing
- Super polished bearing races for low friction rolling
- 6-bolt ISO disc mounting surface

$54.99 - $84.99
Quick Release Model
• Model Number: HB-M8000
• Series: DEORE XT
• Disc Rotor Mount: Center Lock Disc
• Axle Type: QR
• Axle Length: 100mm
• Axle Diameter: 14mm
• Contact Sealing: Labyrinth & Contact
• Spoke Holes: 32H
• Center to Flange (Right): 41mm
• Center to Flange (Left): 44mm
15x100mm Thru-Axle Model
• Model Number: HB-M8010
• Series: DEORE XT
• Disc Rotor Mount: Center Lock Disc
• Axle Type: 15mm E-Thru
• Axle Length: 100mm
• Axle Diameter: 17.5mm
• Contact Sealing: Labyrinth & Contact
• Spoke Holes: 32H
• Center to Flange (Right): 44mm
• Center to Flange (Left): 44mm

$66.99
With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds.
- Easy disc brake rotor installation with Center Lock spline mount and lock ring
- Tool-free 15mm thru axle system is stiff and lightweight
- Simple setup and reliable trail performance

$70.99
Shimano XT M756 front hub.
- Double contact sealing
- Super polished bearing races for low friction rolling
- Light alloy QR lever and nut
- 6-bolt ISO disc mounting surface

$76.99
With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds.
- Easy disc brake rotor installation with Center Lock spline mount and lock ring
- Tool-less 15mm thru axle system optimizes rigidity and weight
- Simple setup and reliable trail performance

$89.99 - $109.99
Shimano XT FH-M8010/M8000 Rear Hubs.
- Double contact bearing seals
- Super polished bearing races for low friction rolling
- Shimano Quick-engagement freehub
- Not compatible with Shimano 11-Speed Road cassettes
- Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability
- Center Lock disc brakes provide reliable braking power (lockring sold separately)

$90.99
Shimano XT FH-M756 Series Rear Hub
- Double contact bearing seals
- Super polished bearing races for low friction rolling
- Light alloy QR lever and nut
- 6-Bolt rotor mount
- Bearing Type: Loose Ball
- Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed
- Center to Flange, Left: 33.5
- Center to Flange, Right: 20.5
- Flange Diameter Left: 61
- Flange Diameter Right: 61
- Hub Drilling: 32
- Hub/Brake Compatibility: 6-Bolt Disc
- Rear Axle: QR x 135mm
- Skewer Included: Yes
- Spoke Interface: J-Bend
- Weight: 495 grams

$109.99
- Series : DEORE XT
- Disc Rotor Mount : Center Lock Disc
- Axle Type : 12mm thru-axle
- Axle : 12x148mm
- Contact Sealing : Labyrinth & Contact
- Spoke Holes : 32H

$116.99
The new standard for durability and price.
- Contact-free seals and high precision build guarantee smooth bearings

$116.99
Direct power meets simplicity—running smoothly day-in and day-out.
The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

$129.99
The FX front hub was designed from the ground up, with modern street in mind. Thicker angled hub flanges optimize the spoke line, creating a stiff wheelset that is protected from grinds with the included Cinema CF nylon hub guards. The recessed bearings remove any chance of bearing seat stretch and ensure the hub continues to roll smooth. A 15mm Chromoly inner axle provides plenty of strength for all the grinds you can throw at it.
- Axle: 15mm Hollow Chromoly Center Axle
- Bolts: Chromoly 3/8" (17mm Socket / 6mm Allen)
- Shell: 6061-T6 Aluminum 36-Hole
- Bearings: 2 x 6902 Sealed Bearings
- Cones: 7075-T6 Aluminum Push-On Cones
- Guards: Cinema CF Hub Guards
- Weight: 11.9oz

$129.99 - $157.99
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.

$131.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Fully convertible with tool-free end caps
- 24, 28 or 32 spoke holes

$149.99 - $155.00
- Weight-optimized, gravity-inspired front hub
- 32mm-diameter oversized bearings allow adaptability up to 20mm thru axles
- Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes
- Compatible with 32 HEX front hub adapters only
- Advanced seal system improves prevention of bearing contamination

$154.99
Alloy Shimano Micro Spline Freehub Body for HEX rear hubs.
- Compatibility: HEX J-TYPE/HEX STRAIGHT-PULL Rear Hubs
- Includes: Spacer ring, conversion spacer, and 3 bearings
- Material: alloy
- Weight: 108g

$154.99
- Highly weight-optimized front hub, ideal for Gravel and XC.
- 28mm-diameter bearings minimize overall weight and allow adaptability up to 15mm thru axles
- Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes
- Compatible with 28 HEX front hub adapters only
- Advanced seal system improves prevention of bearing contamination

$163.99
This conversion kit allows you to use SRAM's 11-speed mountain cassettes on your Stan's NoTubes 3.30HD wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.

$169.99
Reliable, simple, and e-bike specific hub.
To withstand the higher torque of e-drive systems, the 350 hybrid is equipped with steel rotors and a specific 24T ratchet machined out of hardened steel. Oversized bearings ensure smooth running under extreme conditions.

$291.99
Zipp's ZM2 hubset delivers dependable precision performance to the gnarliest trail.
- Engineered in Germany with better seal design for improved durability
- Compatible with e-mountain bikes
- Spoke Count: 32H
- Boost only
- 6-bolt brake interface

$294.99
- SPANK's HEX DRIVE 102T technology delivers 3.5° engagement, for almost instant pickup
- 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click
- Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel
- Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes
- Advanced seal system improves prevention of bearing/drive system contamination

$298.00
Whether the goal is a finish line, epic adventure or simply getting back home again, our new 900 hubs are ready for the challenge. On the inside, our smooth and durable DOUBLE TIME drive mechanism ensures rapid lightning-fast engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Includes Quick Release & 12x142mm Through AxleCaps
- Fully convertible with tool free end caps
- DOUBLE TIME mechanism offers smooth,quick and durable engagement
- Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes
- Axle type: Conversion Caps included
- Spoke holes: 24
- Brake compatibility: Disc (6-bolt)
- Driver Mechanism: Double Time - Four Pawl
- Axle material: Tapered aluminum
- Driver body material: Aluminum
- Hub shell: Aluminum - Seeker angled flanges - Oversized body

$309.99
The updated team favorite, FX2 freecoaster hub. Featuring proven KHE based internals, a 9T dual-sealed bearing driver with additional bushing, and a super-strong heat-treated Chromoly 14mm axle with 6mm internal hex for easier maintenance. Updated with the DTC system, changing drive side only requires a driver change instead of a whole hub replacement. Slack can be adjusted from 55 degrees up to 180 degrees depending on your preference, and ships with 156 degrees slack as standard. The included nylon CR and DR hub guards keep your hub protected from grinds straight out of the box.
- 9T Freecoaster
- Axle: 14mm Hollow Heat-Treated Chromoly
- Axle Nuts: 17mm Chromoly
- Shell: 6061-T6 Aluminum 36-hole
- Bearings: 1 x 6002, 1 x 7905, 2 x 6902 + Bushing
- Clutch: DTC (Dual Threaded Clutch)
- Cones: Threaded Drive Side and Non-Drive Side
- Guards: Compatible with Cinema DR and CR hub guards
- Slack: Includes 3 Slack Washer For Fine Tuning
- Weight: 25.3oz (w/Guards Installed)

$327.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes
- Fully convertible with tool-free end caps
- BOOST variants
- 24, 28 or 32 spoke holes
Page 1 of 2
Next page